メインコンテンツへスキップ

Convert MPEG to AAC: Free Online Converter

Convert MPEG Video to Advanced Audio Coding online for free. Fast, secure video conversion with no watermarks or registration.

163,297件のファイルを変換済み

MPEGに対応

アップロードすることで、これらのファイルの権利を有していること、および利用規約に同意することを確認したものとみなされます。

変換設定: ファイルを追加すると調整できます

Format: HH:MM:SS (leave empty to start from beginning)

Format: HH:MM:SS (leave empty to keep until end)

0100%200

0% = silent, 100% = original, 200% = double loudness

00s10

Gradually fade the audio in over this many seconds

00s10

Gradually fade the audio out over the final seconds

Leave as-is for the encoder default (VBR where supported); pick a rate to force it.

Even out audio levels (EBU R128)

Play audio backwards

Remove EXIF data, GPS, camera info

安全な転送

HTTPS暗号化アップロード

プライバシー優先

ゲストのファイルは約2時間で自動削除

登録不要

すぐに変換を開始

どこでも動作

あらゆるブラウザ、あらゆるデバイス

MPEG から AAC への設定

エンジン
メディア
設定
調整できる設定: 12
  • Trim Start
  • Trim End
  • Volume
  • Fade In
  • Fade Out
  • Bitrate
  • Sample Rate
  • Channels
  • Normalize Volume
  • Audio Channels
  • Reverse Audio
  • Strip Metadata

変換方法

1

アップロードエリアにドラッグするか、クリックして選択し、.mpegファイルをアップロードしてください。

2

必要に応じて出力設定を調整してください。デフォルト設定ではオリジナルの品質を維持します。

3

「変換」をクリックし、準備ができたら.aacファイルをダウンロードしてください。

MPEGからAACへの変換について

MPEG video files carry both video and audio tracks, with the audio typically encoded as MPEG Audio Layer 2 (MP2) at 192-384 kbps. AAC (Advanced Audio Coding) is the successor to MP3, standardized in MPEG-2 Part 7 and refined in MPEG-4 Part 3, delivering better sound quality at equivalent bitrates. Extracting audio from MPEG to AAC preserves more fidelity per kilobyte than converting to MP3.

MPEGをAACに変換する理由

MPEG Audio Layer 2 is a capable codec, but it lacks the psychoacoustic refinements of AAC. At 128 kbps, AAC achieves audio quality comparable to MP2 at 192 kbps, making it significantly more storage-efficient. AAC is also the native audio format for Apple devices, iTunes, YouTube, and most streaming platforms.

Extracting audio from MPEG recordings — such as TV captures, VHS digitizations, or DVD rips — into AAC gives you compact, high-quality audio files ready for modern playback ecosystems. Whether you need podcast-ready speech from a broadcast recording or a clean music track from a concert tape, AAC provides the best lossy quality available.

主な活用例

  • Extracting dialogue tracks from recorded television broadcasts for podcast repurposing
  • Pulling music from VHS-era concert recordings digitized to MPEG
  • Creating audio-only versions of educational lectures stored in MPEG format
  • Building a mobile playlist from a library of DVD-ripped MPEG files
  • Isolating commentary audio from archived sports broadcasts

仕組み

FFmpeg strips the video stream entirely and re-encodes the MP2 audio to AAC using the native FFmpeg AAC encoder or libfdk_aac (higher quality). Typical parameters: `-vn -acodec aac -b:a 192k -ar 44100`. The VBR mode (`-q:a 2`) is recommended for variable-bitrate encoding that allocates more bits to complex passages and fewer to silence.

品質とパフォーマンス

Since both MP2 and AAC are lossy codecs, there is a generational quality loss. However, if the source MP2 was encoded at 256 kbps or higher, transcoding to AAC at 192 kbps VBR will produce output that is perceptually transparent to most listeners. For archival purposes, consider extracting to FLAC first, then re-encoding to AAC.

Media EngineModerateMinimal Quality Loss

デバイス互換性

DeviceMPEGAAC
Windows PCPartialPartial
macOSPartialNative
iPhone/iPadPartialNative
AndroidPartialPartial
LinuxPartialPartial
Web BrowserNoNo

プラットフォーム別の推奨設定

YouTube

Resolution: 1920x1080

Bitrate: 8-12 Mbps

H.264 recommended for fast processing

Instagram

Resolution: 1080x1080

Bitrate: 3.5 Mbps

Square or 9:16 for Reels

TikTok

Resolution: 1080x1920

Bitrate: 4 Mbps

9:16 vertical, under 60s ideal

Twitter/X

Resolution: 1280x720

Bitrate: 5 Mbps

Under 140s, 512MB max

WhatsApp

Resolution: 960x540

Bitrate: 2 Mbps

16MB limit for standard, 64MB for document

Discord

Resolution: 1280x720

Bitrate: 4 Mbps

8MB free, 50MB Nitro

最良の結果を得るためのヒント

  • 1Use VBR mode (-q:a 2 in FFmpeg) for optimal quality-to-size ratio — it adapts bitrate to audio complexity
  • 2Normalize audio levels after extraction if the source MPEG had inconsistent volume (common in TV recordings)
  • 3Check if the MPEG audio is already MP3 — if so, you can extract it losslessly with `-acodec copy` to MP3 instead
  • 4For speech-only content like lectures, 96 kbps AAC-HE provides excellent intelligibility at tiny file sizes
  • 5Add metadata tags (title, artist, album) during conversion to keep your audio library organized

関連する変換

MPEG to AAC extraction lets you salvage high-quality audio from bulky legacy video files, producing compact files that play natively on every modern device and platform.

MPEGとAACの比較

特徴MPEGAAC
正式名称Moving Picture Experts GroupAdvanced Audio Coding
拡張子.mpeg.aac

よくある質問

Yes, because both MP2 (the typical MPEG audio) and AAC are lossy. You are transcoding from one lossy format to another. However, at adequate bitrates (192+ kbps AAC), the loss is minimal and rarely perceptible.
128 kbps is fine for speech content. For music, use 192-256 kbps. If storage is not a concern, 320 kbps AAC is effectively transparent quality for all content types.
Only if the MPEG already contains AAC audio, which is uncommon — most MPEG-1/2 files use MP2 or MP3 audio. If the audio is already AAC, FFmpeg can copy it directly with `-acodec copy`.
Yes. AAC playback has been supported on Android since version 1.0. It is also the default audio format for YouTube, Spotify, and Apple Music.
Dramatically smaller — you are discarding the entire video stream. A 1GB MPEG file might produce a 30-50MB AAC file, depending on audio duration and bitrate.
AAC produces better quality at the same bitrate, especially below 128 kbps. MP3 has slightly broader compatibility with very old devices. For modern use, AAC is the better choice.

関連する変換とツール

MPEGから他の形式への変換

他の形式からAACへの変換

関連ツール

MPEGを他の形式に変換

他の形式をAACに変換